Fast, Reliable Spray Foam Insulation Across New Braunfels
Spray foam insulation in New Braunfels typically runs $1.80-$3.20 per board foot for open-cell and $3.50-$5.50 for closed-cell, with most whole-attic retrofits in 2,000-square-foot homes falling between $3,800 and $7,200. We’re usually on-site in New Braunfels within 24-48 hours of your call, and every job starts with a written price before anyone lifts a tool. Call (830) 243-6352 to schedule.
We’ve worked the full stretch of New Braunfels’s growth corridor, from the older ranch homes near Gruene out to the newer subdivisions along FM 306 and FM 1101. Our crews know what the building boom left behind: code-minimum blown fiberglass that looks right at the attic hatch but thins to almost nothing over exterior walls and can lights. That speed-cut insulation is why so many New Braunfels homeowners see summer electric bills spike past $400 and rooms that never cool evenly. We don’t blow new insulation over that mess. We seal first, then insulate, and we prove the result with before-and-after blower-door numbers.
Why Topside Attic Insulation New Braunfels Is New Braunfels’s Preferred Spray Foam Insulation Company
We’ve sealed and insulated more than 9,000 homes since 2016, and a significant share of those have been right here in New Braunfels and the surrounding Hill Country. Our reviews from New Braunfels customers consistently mention the same things: the crew arrived on time, the price on the paper matched the price at the end, and the blower-door report showed exactly what changed.
Dispatch and scheduling are coordinated from our San Antonio office, but our crews live and work in the New Braunfels area. That matters when you’re trying to get someone out to Veramendi on a Saturday or need a rim-joist assessment before a hard freeze rolls down the Balcones Escarpment. We’re not driving up from Austin or down from San Antonio that morning. We’re already here.
Every technician is background-checked and uniformed, and when you call (830) 243-6352, a live person answers. No voicemail loops. No callback windows measured in business days. Under Haven Standard, you get a named technician and a text when they’re on the way.
Our Spray Foam Insulation Services in New Braunfels

Open-Cell Spray Foam
Open-cell spray foam in New Braunfels runs about $1.80-$2.80 per board foot installed. We use it most often in attic floors and wall cavities of post-2005 tract homes in Hunter’s Crossing and Elm Creek, where the original blown fiberglass has settled or was never full-depth to begin with. Open-cell breathes, which helps manage the humidity that Gulf air pushes up the Escarpment, but it needs proper vapor management in river-corridor subdivisions where ambient moisture runs higher. We specify it with a vapor retarder when the home sits near the Guadalupe or Comal.

Closed-Cell Spray Foam
Closed-cell runs $3.50-$5.50 per board foot and delivers R-6.5 per inch, roughly double open-cell’s R-3.7. In New Braunfels, we specify closed-cell for rim joists in slab-on-grade homes, garage ceiling bays, and any application where Winter Storm Uri proved that plumbing penetrations need both insulation and structural rigidity. The 2-pound density also acts as a vapor barrier on its own, which matters in those same river-corridor homes where open-cell would need backup. We source closed-cell from Demilec and Johns Manville, depending on the specific assembly and what the written scope calls for.

Rim Joist Spray Foam
Rim joist spray foam is one of our most called-for services in New Braunfels, and for good reason. The vast majority of local housing stock is post-2005 slab-on-grade construction, and the rim joist - where the foundation wall meets the first floor - is often completely unsealed, leaking conditioned air into the garage or exterior and pulling in garage fumes and soil gas. A typical New Braunfels rim-joist treatment runs $1,200-$2,400 for a 2,000-square-foot home, depending on access and whether we need to move stored items. We use closed-cell here, always. The rim joist is structural; it needs the density.

Garage Ceiling Spray Foam
Garage ceiling spray foam in New Braunfels addresses a specific problem the building boom created: bedrooms and bonus rooms over unconditioned garages that bake to 120°F in July and drop near outdoor ambient in a freeze. We see this constantly in the newer subdivisions along the I-35 corridor, where builders ran minimal batt insulation between garage ceiling joists to hit price points. Foaming that ceiling deck, typically $2,400-$4,800, creates a true thermal and air barrier. We often pair it with rim-joist sealing if the garage shares a foundation wall with the conditioned space.

Spray Foam Roof Deck
Spray foam applied directly to the roof deck, rather than the attic floor, converts the attic from a vented to an unvented, conditioned space. In New Braunfels’s climate, this makes sense for homes with HVAC equipment or ductwork in the attic, which describes most post-2010 builds. A roof-deck treatment typically runs $5,500-$10,000 depending on pitch and accessibility. The payoff is ductwork that doesn’t sit in 140°F attic air for five months of the year.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in New Braunfels
We don’t lock you into a proprietary product. Our materials come from Owens Corning, Johns Manville, Demilec, and other manufacturers we specify based on the assembly, not a distributor agreement. For New Braunfels homes, that means we can match open-cell or closed-cell products to the specific humidity exposure and thermal performance the job demands. We stock common densities and formulations locally, so we’re not waiting on a freight shipment to start your job. The brand goes on the written scope before work starts, and the batch documentation stays in your file.
Common Spray Foam Insulation Problems We See in New Braunfels Homes

- Thinned fiberglass over exterior walls and can lights in fast-built subdivisions. Crews racing to keep up with New Braunfels’s growth often blew full depth at the attic hatch but barely covered the top plates and recessed fixtures. Spray foam applied without extending to these gaps leaves the home’s worst leak paths unsealed. We find this in Veramendi, Hunter’s Crossing, and Elm Creek weekly.
- Moisture accumulation on cold-can surfaces in river-corridor homes. Open-cell foam without proper vapor management traps humidity against recessed light housings in subdivisions near the Guadalupe and Comal. The foam itself isn’t failing; the assembly is wrong for the microclimate. We specify closed-cell or add a vapor retarder when the home sits in these higher-humidity zones.
- Freeze-damaged plumbing penetrations in 1970s-1990s ranch retrofits. Winter Storm Uri exposed where foam was sprayed over wet framing or where cavities were only partially filled. The trapped moisture froze, expanded, and caused adhesion failure. We strip failed foam, dry the cavity with directed heat, and re-apply to a clean substrate. No shortcuts.
- Garage ceiling bays with compressed or missing batt insulation. Rooms over garages in newer New Braunfels homes are often the hottest in summer and coldest in winter. The builder-grade batt was either underspecified or pulled aside during drywall installation and never replaced. Foam fills the cavity completely and stays put.
Pricing for Spray Foam Insulation in New Braunfels, TX
| Application | Typical Range | Notes |
|---|---|---|
| Open-cell spray foam (attic floor/walls) | $1.80-$2.80 / board foot | Most common for attic retrofits; 3.5″ typical depth |
| Closed-cell spray foam (rim joist, garage, structural) | $3.50-$5.50 / board foot | Higher density, vapor barrier, structural rigidity |
| Rim joist treatment (typical 2,000 sq ft home) | $1,200-$2,400 | Closed-cell only; includes prep and cleanup |
| Garage ceiling spray foam | $2,400-$4,800 | Varies with ceiling area and obstructions |
| Whole-attic open-cell retrofit | $3,800-$7,200 | Assumes 2,000 sq ft home, attic floor application |
| Roof deck (unvented attic conversion) | $5,500-$10,000 | Pitch and access are main cost drivers |
What moves you within these ranges: cavity depth, accessibility, whether we need to remove existing insulation first, and whether air sealing of top plates, can lights, and penetrations is included. Every New Braunfels job gets a written price before any work starts, and we offer a Free Second Opinion on any written estimate you’ve already received. Call (830) 243-6352 for your specific number.
We Also Serve Cities Near New Braunfels

Our crews work throughout the I-35 corridor and Hill Country, including New Braunfels and the surrounding communities of Seguin, Cibolo, Schertz, and Canyon Lake. Each area has its own building stock and climate exposures, and we adjust our specifications accordingly. If you’re outside New Braunfels city limits but within reasonable driving distance, the same written-price guarantee and 365-Day Done Right Promise apply.
Serving New Braunfels, TX - Our Local Coverage Area
We’re based in the New Braunfels area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Spray Foam Insulation in New Braunfels

Because the blown fiberglass in most New Braunfels homes from this era was installed to pass inspection, not to perform. We regularly find full depth at the attic hatch and a thin film over exterior walls and can lights - the exact spots where conditioned air escapes and summer heat enters. Spray foam seals those leak paths while it insulates, and our blower-door test proves the difference in one number. Call (830) 243-6352 for a free assessment and written price.
Yes. Homes in river-corridor subdivisions experience measurably higher ambient humidity, which can cause open-cell foam on cold-can surfaces to hold moisture and trigger mold at recessed fixtures. We typically specify closed-cell or open-cell with a vapor retarder in these microclimates, and we note the humidity exposure on your written scope. The brand and formulation are chosen for the assembly, not pulled from a truck at random.
Absolutely. We work rural New Braunfels properties with detached shops, RV bays, and oversized garage doors that standard residential crews won’t touch. The scope, the foam density, and the application method change with the structure - a steel-truss shop gets a different specification than a stick-framed garage - and the price reflects the actual work. We bring the same written-price guarantee and documented photo record to acreage jobs that we bring to tract homes in Veramendi.
Closed-cell spray foam at 2-pound density provides both insulation and structural rigidity around plumbing penetrations, and it acts as its own vapor barrier. The key is proper application: the cavity must be dry, the substrate clean, and the foam must fully encapsulate the penetration without voids. We don’t spray over wet framing or existing moisture. After Uri, we’ve stripped and re-done too many failed applications where moisture was trapped inside. Done right, closed-cell protects against freeze. Done wrong, it hides the problem until it fails catastrophically.
We specify from Owens Corning, Johns Manville, Demilec, and other manufacturers depending on the assembly requirements. The brand and product name go on your written scope before work starts, and we don’t substitute without written approval. No proprietary lock-in, no mystery foam. If you have a preference or a concern about a specific formulation, we’ll discuss it when we write the scope. Call (830) 243-6352 to schedule.
Ready to see what spray foam can do for your New Braunfels home? Call (830) 243-6352 for a free estimate with a written price before any work starts. Our Spray Foam Insulation team serves New Braunfels and the surrounding Hill Country with documented results you can verify.
Written by Wes Okafor, Owner at Topside Attic Insulation New Braunfels, serving New Braunfels since 2016.